jfryjfry said:Bummer about the problems both for you and for others!
curious about an earlier statement you made about side skirts being for mileage… what skirts??
glad to hear you’re enjoying the car though. I have so much fun with mine on track.
I’ll let the man himself tell you.
My last track day of the year was this last weekend. I ended up setting a new PB by about 0.8s. Optimal says I have a 1:18 flat in me on the Catalyst. I was 2nd on transponders for the day, and 14th on Garmin Catalyst leaderboard for the year. No real issues this outing….
I investigated the wiring and lines. It’s all hooked up correctly. We may be down to a bad hub sensor, sensor converter, or DSC ecu. Though someone posted something interesting on the facebook group that mentioned an intermittent lockup issue. They were having the battery voltage drop enough when the ABS pump went through the…
Kendall Frederick said: Nice dyno numbers! I’m still following your ABS install with interest. My ABS on my C6 decided it wants to not communicate and have CANbus errors; I’m still working through stuff to get it to the dyno but eventually I’m going to have to get into it. Not sure if I want…
JMcD said: Nicopp lines are the easy button. They can kink if you try to bend them too much by hand, but no issues even with a small radius tool. The softer material helps the flares seal more easily. I put the stainless spring shield stuff on all mine to protect against rocks/debris. That has…
Future plans so far- I'm building this towards spec corvette. That allows me to run st3/tt3 with nasa too iirc. The class looks interesting and only so many things you can do Fluids need changed. Ordered most of them already- 75w-90 rear diff. Amsoil Torque drive ATF for the transmission. Supposedly its compatible with the…
I tossed in a tick clutch master. The clutch stuck a couple times at high RPM at blackhawk. It’s a common recommended solution. Now the clutch has a super short throw. Works for me, but it’ll make the engagement point a little harder to find. I’m hoping this doesn’t turn into a clutch replacement. It…