Trackspec hood vents
Tonight I did the trackspec hood vents.
Starting to look a little more racecar. I think I’ll work on getting my driver’s seat mounted and the belts in next.
Similar Posts
Seats finally mounted
After what feels like 27 trips to the hardware store the seats are finally mounted. Latest complication was the bolts holding the seat to the bracket were impacting the floor and preventing the bracket from lying flat. Another round of seat fitting I was finally able to get it bolted down and the Harness bar…
Fixing all six first-track-day issues
theruleslawyer said: Burning some oil in the braking zone. The engine is probably under a ton of vaccum and sucking some oil in. Reportedly it clears right up out of the turn, and doesn’t impact a high G turn alone. I need to check the oil catch can. Maybe its full? Brake has inconsistent feel….
Back together: MPI hubs, knuckles, helper springs
I got the car back together. The parts I ordered off ebay they shipped me two right knuckles instead of a pair and it was the left I really needed. I ended up hunting one down Friday evening and driving an hour away to pick up a knuckle locally. A buddy helped me press in…
Ceramic plug wires: fixed it, then regretted it
I ordered a new set of wires and it cleared up the misfire. The idle stumble went away too. Nice bit is these have ceramic boots that won’t melt and have integrated fiberglass insulation to protect them from headers. https://tonsperformance.com/products/sleeved-9070c?_pos=4&_sid=72c8dc2e0&_ss=r I also put the 2nd MPI hub on the passenger rear. Not because it was…
