Trackspec 4-pt bar in

Got my trackspec 4pt bar installed. Rudz Racing did the install for me. Anyone want to buy a BK harness bar?

Got my trackspec 4pt bar installed. Rudz Racing did the install for me. Anyone want to buy a BK harness bar?
Last night was my first time trials event. I was at Autobahn North, which is normally the configuration reserved for members during the day. However this was an evening event, which was another first. Drivers’ meeting was 4:45 and first car off about 5:15. Only 3 sessions, but only 3 run groups as well so…
I made some good progress on the mk60 on Saturday. First up was getting the ABS mounted. I got some donut isolators for the mount. If you shape the mount correctly you don't strictly need these, but I wanted to space the mount a little bit further out and it gives you the ability to…
Kendall Frederick said: Nice dyno numbers! I’m still following your ABS install with interest. My ABS on my C6 decided it wants to not communicate and have CANbus errors; I’m still working through stuff to get it to the dyno but eventually I’m going to have to get into it. Not sure if I want…
It’s alive! So tonight I got INPA set up on my laptop. It’s really helpful to have a row of dedicated ‘F’ keys for the software. https://www.bimmerfest.com/threads/mikes-easy-bmw-tools-package.879366/ The wheel speed sensors register, the brake sensor looks like it’s inverted. It’s ‘on’ when you are off the brake pedal. That’s normal. mk60e1 wants e87/e90 as the…
Finished up the hydraulic lines also a better pic of routing near the steering shaft
This weekend I did suspension v2 on the front of the car Ridetech Delrin AF bushings AMT camber lockout kit AMT UCA stud conversion Strano front sway bar Whiteline adjustable endlinks Moog ball joints I’ve been avoiding this for ages, but this is the largest window I’ll have to work on the car before events…