QuickJack arrived
Exciting day. The quickjack arrived and got assembled. I’ve been waiting on it to get started with some of the mechanical work.

Exciting day. The quickjack arrived and got assembled. I’ve been waiting on it to get started with some of the mechanical work.

Last weekend I was out at Blackhawk Farms again, this time with Northwoods shelby club. Two weekends in a row is a lot for me. However my folks came out from Idaho and I took them to the track with me. My dad got to ride on the track for the first time with me….
Finished up chasing down the ABS codes today I installed the brake switch from above and it works perfectly. It’s also wired exactly like BMW originally did now instead of through a complicated mess. When I did the original setup I thought it was odd that INPA listed the brake as “on” when the pedal…
Last weekend I tackled the steering rack. What a PITA that was. I’d like to strangle the engineer who made me drop the subframe to get the rack out and only allow about 1/32nd of a turn on the PS lines from the pump. Extra fun was the new rack didn’t come centered. So when…
I went to my first track day with the c5 this weekend. I've been to autobahn south enough times that I'm pretty familiar with the line. My previous best in the F82 M4 was 1:38.21. First day out in the new c5 I ran 1:37.94. Down well over 100hp and losing time with shifts vs…
So this weekend was frustrating. I finished up the rear delrin bushings. Luckily the rear is a lot easier as you can press them out either direction. It’s even possible with the arms still on the car. I skipped the rear ball joints for now. They are in okay condition and I just wanted it…
File this under dumb stuff I do… Also poured in some lucas stop leak. The fluid in there was pretty gross. Cross my fingers. Rented the steering wheel puller again. My wheel angle was off and the 1/2″ adapter didn’t get it where I needed. If you take the clock spring off you can get…